Description:

1. The 'OpenWrt One/AP-24.XY' router board based on MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C dual-band WiFi 6 chipset.It is the first official development board of the OpenWRT open source community
2. OpenWrt One is a device based on the MediaTek Filogic 820 SoC that has WiFi 6, dual-band, 3×3/2×2, 1 x 2.5Gbit WAN, 1 x 1Gbit LAN, 1GB DDR4 RAM, 256 MiB NAND, 16 MiB NOR, M.2 SSD and USB 2.0.
3. OpenWrt One uses Mediatek’s MT7981B SoC with a dual-arm Cortex-a53 core at 1.3 GHz, 1 GB DDR4 RAM and 256 MiB SPI NAND storage. It also integrates 16 MiB of additional protected storage as a system backup, dual storage hardware to ensure that the onboard system is unbrickable, and finally integrated M.2. 2230/2242 NVMe PCIe 2 X1 ports can be used to add external storage. And with a battery holder for an internal clock, OpenWrt One offers a USB 2.0 Type-A and a mikroBUS expansion port to provide more interfaces to a host of technical possibilities.

Specifications:

SoC controller	MediaTek MT7981B (Filogic 820) dual-core Cortex-A53 processor 1.3GHz frequency
Memory	1GB DDR4
Storage	128 MB SPI NAND flash memory for U-boot and Linux systems
	4 MB SPI NOR flash for write-protected (default) recovery bootloader (can be refreshed for own use via jumpers)
	Using two types of flash devices makes the board nearly unbreakables
	M.2 2242/2230 interface supports NVMe SSD hard drive (PCIe gen 2 x1)
Network	1x2.5GbE RJ45 full mouth
	1x Gigabit RJ45 terminal
	Dual-band WiFI6 wireless network supported by MediaTek MT7976C (2x2 2.4 GHz +3x3/2x2 +zero-wait DFS 5Ghz)
	3x MMCX antenna interface
USB interface	1x USB 2.0 Type-A host port
	USB Type-C (device, console) port using Holtek HT42B534-2UART to USB chip
Extensions	MikroBUS extension module socket
Debug	Console connected via USB-C port into 3-pin header, 10-pin JTAG/SWD header for main SoC
RTC real-time clock	Supports onboard RTC real-time clock
Other	Reset and user interface buttons
	Startup method selector switch: NAND (normal) or NOR (recovery)
	2x PWM LED.2x Ethernet LED (GPIO driver)
	EM6324 External hardware watchdog
	NXP PCF8S63TS (12C) RTC with CR1220 coin cell battery backup holder
Powered by	12V USB-PD on USB-C port (may have been changed to brightest 15V)
	802.3at/af PoE network power can be created through Banana Pi RT5040 module
Dimensions	148x100.5 mm Compatible with Banana Pi BPI-R4 case design

Features:

1. Powerful Performance: Equipped with a MediaTek MT7981B dual-core processor @1.3GHz and 1GB DDR4 memory for enhanced computing capabilities.
2. High-Speed Connectivity: Supports 2.5GbE and Gigabit Ethernet RJ45 ports for fast wired network connections.
3. Dual-Band WiFi 6: Leverages MediaTek MT7976C WiFi 6 chipset ensuring stable and fast wireless connections with dual bands.
4. Flexible Storage Options: Comes with 128MB SPI NAND, 16MB SPI NOR, and an M.2 slot supporting NVMe SSD for versatile storage expansion.
5. Open Source Compatibility: Fully compatible with OpenWrt, ideal for users who prefer open-source firmware for customization and advanced functionalities.
6. Rich Expansion Interfaces: Includes MikroBUS slot, USB 2.0 Type-A, RTC battery support, allowing for various peripheral expansions and enhancements.

Package Include:

Board Only:

1x Module Board

Full Kit(EU Plug):

1x Openwrt One Motherboard+dissipation+RT5400 PoE Module

1x Opennwrt One Shell

3x 3dB Antennas

1x Cable

1x Power Supply(EU Plug)

Full Kit(US Plug):

1x Openwrt One Motherboard+dissipation+RT5400 PoE Module

1x Opennwrt One Shell

3x 3dB Antennas

1x Cable

1x Power Supply(US Plug)