It appears that your cart is currently empty
Description:
1.69-inch touch LCD with expansion board built-in ST7789V2 driver chip and CST816T capacitive touch chip provides routine data such asArduino, Raspberry Pie, ESP32S3, Pico and STM32.
Specifications:
Working voltage: 3.3V/5V
Resolution: 240 × 280 pixels
Display chip: ST7789V2
Touch chip: CST816T
Display interface: 4-wire SPI
Touch interface: I2C
Display panel: IPS
Touch type: capacitive induction type
Display size: 27.972× 32.634 mm
Pixel size: 0.11655× 0.11655 mm
Product size: 33.13× 41.13mm
Features:
1. 240 × 280 resolution, 262K color, can clearly display color pictures.
2. The touch screen has high transmittance, fast responsing and long service life.
3. Built-in ST7789V2 driver chip and CST816T capacitive touch chip, which communicate with SPI and I2C interfaces respectively, do not occupy too many interface pin resources, and can be connected to main control boards such as Raspberry PI/ESP32S3/Pico/ArduinoSTM 32.
4. Provide routine information such as Raspberry Pie, ESP32S3, Pico, Arduinoand STM32.
Package Include:
1x 1.69inch Touch LCD Module
1x GH1.25 12PIN Cable
Pin Description:
Built-in ST7789V2 driver chip and CST816T capacitive touch chip.
VCC: Power supply positive (3.3V/5V power supply input)
GND: power ground
LCD_DIN: SPI communication MOSIpin
LCD_CLK: SPI communication clk pin
LCD_CS: Chip selection pin of LCD, active low.
LCD_DC: data/command pin of LCD, with low level indicating command and high level indicating data.
LCD_RST: reset pin of LCD, active low.
LCD_BL: backlight pin of LCD
TP_SDA: data pin of TP.
TP_SCL: clock pin of TP
TP_ RST: reset pin of TP, active low.
TP_IRQ: interrupt pin of TP.
Pin Connection Reference:
| 1.69inch Touch LCD Module | Paspberry Pi(BCM) | ESP32S3 | PICO | Arduino1 | STM32 |
| VCC | 3.3V | 3.3V | 3.3V | 5V | 3.3V |
| GND | GND | GND | GND | GND | GND |
| LCD_DIN | 10 | 11 | GP11 | 11 | PA7 |
| LCD_CLK | 11 | 10 | GP10 | 13 | PA5 |
| LCD_CS | 8 | 9 | GP9 | 10 | PB6 |
| LCD_DC | 25 | 8 | GP14 | 7 | PA8 |
| LCD_RST | 27 | 14 | GP8 | 8 | PA9 |
| LCD_BL | 18 | 2 | GP15 | 9 | PC7 |
| TP_SDA | 2 | 6 | GP6 | SDA | PB9 |
| TP_SCL | 3 | 7 | GP7 | SCL | PB8 |
| TP_RST | 17 | 16 | GP16 | 4 | PA10 |
| TP_IRQ | 4 | 17 | GP17 | 3 | PB10 |
Related product
HappyFish.co.za
LuckFox Pico Camera SC3336 3MP C...
Specifications:Sensor: SC3336Camera Type: ColorCMOS ...
R 446.13
Specifications:Sensor: SC3336Camera Type: ColorCMOS Size: 1/2.8'Pixel: 3MP (2304x1296)Shutter: Rolling shutterAperture: F2.0Distortion: <33%Focal Length: 3.95mmFocusing: Manu...
HappyFish.co.za
100K-6GHz Full Band Low Noise Am...
Description:The HT004 Low Noise Amplifier is an elec...
R 832.29 R 548.19
Description:The HT004 Low Noise Amplifier is an electronic device that is primarily used to amplify signals and minimize the effects of noise. It operates in the frequency range...
HappyFish.co.za
WZ3605E CNC DC Buck-Boost Conver...
Feature:>>>Manual: Click here to open<&l...
R 713.77 R 541.36
Feature:>>>Manual: Click here to open<<< Model WZ3605E Input voltage 6.0~36.00V Output voltage 0.60~36.00V Output current 0~5.000A Output po...
HappyFish.co.za
ESP32-S3 7 inch LCD Development ...
Specifications:- Microcontroller: Xtensa 32-bit LX7 ...
R 1,679.70
Specifications:- Microcontroller: Xtensa 32-bit LX7 dual-core processor, up to 240MHz- WiFi: 2.4GHz (802.11 b/g/n)- Bluetooth: Bluetooth 5 (LE)- SRAM: 512KB- ROM: 384KB- Flash M...
HappyFish.co.za
MMDVM Hotspot Spot Radio Station...
Description: Jumbo-SPOT-RTQ is a completely self-con...
R 2,369.70
Description: Jumbo-SPOT-RTQ is a completely self-contained digital hotspot supporting DMR, Dstar, P25 and System Fusion communications. Fully assembled and tested in a ruggedize...
HappyFish.co.za
Radioberry V2.0 Software Defined...
Description:1. The radioberry is actual a radio card...
R 4,379.70
Description:1. The radioberry is actual a radio card (raspberry pi hat), which can be plugged into a raspberry pi, forming a Software Defined Radio (SDR).2. The radio card uses ...